Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

The Elevator Mechanic Exam and A17.1 in Drawings One System on Every Page

Ohm's law, schematics, traction, hydraulics, safeties and governors, door interlocks, the safety circuit and fire service. Each topic has its own page: the drawing first, then what you need to remember. 67 illustrated pages.

GET THE ILLUSTRATED BOOK

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach system drawn, with the explanation right next to it
67 illustrated pages9 parts, from the hoistway to the final review
Up-to-date sourcesASME A17.1, NEC Article 620 and OSHA
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the numbers and steps you need to know:

License = permission to work from your state; CET = private certification. Washington example: 160 questions, 80% to pass.
License = permission to work from your state; CET = private certification. Washington example: 160 questions, 80% to pass.
V = I × R in one triangle: 120 V across a 40 Ω coil = 3 A
V = I × R in one triangle: 120 V across a 40 Ω coil = 3 A
Four steps: coil, list contacts, measure point to point, the open is where voltage disappears.
Four steps: coil, list contacts, measure point to point, the open is where voltage disappears.
Geared uses a worm gear; gearless puts the sheave on the motor shaft; MRL lives in the hoistway.
Geared uses a worm gear; gearless puts the sheave on the motor shaft; MRL lives in the hoistway.
Cold oil = slow, rough starts; hot oil = drift. Heaters and coolers keep the range.
Cold oil = slow, rough starts; hot oil = drift. Heaters and coolers keep the range.
Spring buffers up to 200 fpm (strokes 1-1/2, 2-1/2, 4 in); oil buffers above, max 1 g.
Spring buffers up to 200 fpm (strokes 1-1/2, 2-1/2, 4 in); oil buffers above, max 1 g.
30 lbf (135 N) at the leading edge; 7 ft·lbf with a reopening device, 2.5 without.
30 lbf (135 N) at the leading edge; 7 ft·lbf with a reopening device, 2.5 without.
Fire hat steady on Phase I; flashing when a hoistway or machine room detector trips.
Fire hat steady on Phase I; flashing when a hoistway or machine room detector trips.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 9 parts and 63 topics.

The Problem Isn't You. It's How It Was Explained to You.

It's 10 p.m., you're at the kitchen table with a controller print, and you lose track of which relay closes which contact three lines down. On the job, you'd find that part in the cabinet in a minute.

The study guide gives you paragraphs about symbols, then a table of tiny marks with no part next to them. It makes sense while you read it, and by morning it's gone.

Four steps: coil, list contacts, measure point to point, the open is where voltage disappears.

In the book, the same symbols sit on one page: NO, NC, coil, fuse, limit, button, timer, diode and ground, each one next to the real part it stands for. The mark on the print and the thing in the controller, side by side.

Same with ladder diagrams read left to right, relay logic, the seal-in circuit and tracing a fault from print to controller: each one has its own page.

So when the exam puts a schematic in front of you, you recognize the parts and follow the circuit without going back to the manual.

COMPARE FOR YOURSELF

Same Topic, Two Ways to Study It

THIS
  • The manual: line after line
  • Ohm's law and circuits explained only in words
  • You walk into the exam still unsure
Ohm's law states that the current flowing through a conductor between two points is directly proportional to the potential difference across those two points and inversely proportional to the resistance of the conductor, expressed as E = I × R, where E represents electromotive force in volts, I represents current intensity in amperes and R represents resistance in ohms. By algebraic transposition of the fundamental equation, the remaining quantities may be derived whenever any two values are known, provided the circuit element exhibits linear resistive behavior.
FOR THIS
  • Ohm's law in one triangle
  • The numbers worked out in a box
  • You see it and you get it
V = I × R in one triangle: 120 V across a 40 Ω coil = 3 A
CONTENTS

Take a Look at the 9 Parts and 63 Topics

The exam and the hoistway, electrical theory, schematics, traction, hydraulics, safeties and governors, doors and the safety circuit, fire service and inspection, troubleshooting and final review: 67 pages, all illustrated

IThe Exam and the Hoistway · pp. 5-10
  1. License vs. certification: what each exam asks
  2. How to use this book: one system, same order
  3. The hoistway in cross-section
  4. Car and counterweight: the balance
  5. Units you need on the exam
  6. Code families: who rules what
IIElectrical Theory for the Elevator · pp. 11-17
  1. Ohm's law in one triangle
  2. Power: watts, volts, amps
  3. Series vs. parallel
  4. AC vs. DC on the job
  5. Using the meter safely
  6. Transformers and rectifiers
  7. NEC Article 620 at a glance
IIIReading Schematics · pp. 18-23
  1. Symbols you must recognize
  2. Ladder diagrams: read left to right
  3. Relay logic: one coil, many contacts
  4. Seal-in (holding) circuit
  5. Interlocking direction relays
  6. From print to controller: tracing a fault
IVTraction Elevators · pp. 24-31
  1. Geared vs. gearless machines
  2. Traction: why the rope doesn't slip
  3. Roping 1:1 and 2:1
  4. Hoist ropes: build and inspection
  5. The brake
  6. Motors and drives
  7. Guide rails and roller guides
  8. Compensation and traveling cable
VHydraulic Elevators · pp. 32-38
  1. The hydraulic circuit as a flow
  2. Pressure = force ÷ area
  3. Direct-acting, holed and holeless, roped
  4. The control valve: up, down, leveling
  5. Relief valve and rupture valve
  6. Anti-creep and low oil protection
  7. Oil temperature and viscosity
VISafeties, Governors and Buffers · pp. 39-45
  1. The overspeed chain in order
  2. Governor tripping speed
  3. Type A, B and C safeties
  4. Safety test: what happens on the rails
  5. Ascending car overspeed and unintended movement
  6. Buffers: spring vs. oil
  7. Terminal stopping devices
VIIDoors, Interlocks and the Safety Circuit · pp. 46-52
  1. Hoistway door interlock vs. car door contact
  2. How an interlock locks before it makes
  3. Door operator and clutch
  4. Door closing force and energy
  5. The safety circuit as a chain
  6. Finding the open in the safety string
  7. Leveling and releveling zones
VIIIFire Service, Inspection and Your Safety · pp. 53-59
  1. Fire service Phase I: recall
  2. The fire hat visual signal
  3. Fire service Phase II: in-car operation
  4. Inspection operation from the car top
  5. Entering the pit and the car top
  6. Lockout/tagout on the mainline disconnect
  7. Fall protection and hoistway hazards
IXTroubleshooting and Final Review · pp. 60-67
  1. Troubleshooting in 5 fixed steps
  2. Car won't move: the first 4 checks
  3. Hydraulic car drifts or won't go up
  4. Traction car misleveling or rough ride
  5. Exam day formulas on one page
  6. Numbers to know by heart
  7. Most frequent mix-ups
  8. Your last-week review checklist

One Page, One Topic, All Clear

Think of it this way:

You're on the car top and the car won't move. Somewhere in the safety string a contact is open, and your supervisor wants to know where you'll look first.

In the book, you open the safety circuit page and see it drawn as a chain: every contact in a row, walked in the same order every time.

Cold oil = slow, rough starts; hot oil = drift. Heaters and coolers keep the range.

Same with the overspeed chain, the hydraulic circuit as a flow, the interlock vs. the car door contact and Phase I fire recall: each one on its own page.

Elevator Mechanic Exam Illustrated is 67 illustrated pages in 9 parts, one topic per page, and it closes with troubleshooting in fixed steps, the exam-day formulas on one page and a last-week review checklist.

What you see drawn, you don't have to memorize.

What's Inside Elevator Mechanic Exam Illustrated:

Ipp. 5-10

The Exam and the Hoistway

License vs. certification, how to use the book, the hoistway in cross-section, car and counterweight, the units you need and who rules what.

IIpp. 11-17

Electrical Theory for the Elevator

Ohm's law in one triangle, power, series and parallel, AC and DC, using the meter safely, transformers and rectifiers, NEC Article 620.

IIIpp. 18-23

Reading Schematics

The symbols, ladder diagrams, relay logic, the seal-in circuit, interlocking direction relays and tracing a fault from print to controller.

IVpp. 24-31

Traction Elevators

Geared and gearless machines, traction, 1:1 and 2:1 roping, hoist ropes, the brake, motors and drives, guide rails, compensation and traveling cable.

Vpp. 32-38

Hydraulic Elevators

The hydraulic circuit as a flow, pressure = force ÷ area, jack types, the control valve, relief and rupture valves, anti-creep, oil temperature.

VIpp. 39-45

Safeties, Governors and Buffers

The overspeed chain in order, governor tripping speed, Type A, B and C safeties, the safety test, ascending car overspeed, buffers, terminal stopping devices.

VIIpp. 46-52

Doors, Interlocks and the Safety Circuit

Interlock vs. car door contact, lock before make, door operator and clutch, closing force, the safety circuit as a chain, finding the open, leveling zones.

VIIIpp. 53-59

Fire Service, Inspection and Your Safety

Phase I recall, the fire hat signal, Phase II, inspection operation, entering the pit and the car top, lockout/tagout, fall protection.

IXpp. 60-67

Troubleshooting and Final Review

Troubleshooting in 5 fixed steps, the first checks when the car won't move, hydraulic and traction faults, formulas, numbers to know, mix-ups and a last-week checklist.

At the end of the book: Troubleshooting in 5 fixed steps, exam-day formulas on one page and a last-week review checklist.

Plus: 2 Free Books

Elevator Exam Practice Questions

BONUS 1: «Elevator Exam Practice Questions»

Value on its own: US$ 17.90

Exam-style questions on every chapter with the answer explained, so you find your weak spots before the real test, not during it.

15 Common Elevator Mistakes, Before & After

BONUS 2: «15 Common Elevator Mistakes, Before & After»

Value on its own: US$ 14.90

The mistakes that come up most often on safeties, interlocks, wiring and fire service, each drawn wrong and then right, for a quick review the night before.

Elevator Mechanic Exam Illustrated with 2 Free Books

  • Elevator Mechanic Exam Illustrated: 67 illustrated pagesUS$ 63
  • BONUS 1: Elevator Exam Practice QuestionsUS$ 17.90
  • BONUS 2: 15 Common Elevator Mistakes, Before & AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT ELEVATOR MECHANIC EXAM ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Elevator Mechanic Exam Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're a helper studying at night

You're a helper studying at night

Each system fits on one page, so a short session after your shift actually sticks.

Your exam date is set

Your exam date is set

Formulas, numbers to know and the most frequent mix-ups in a few pages, plus practice questions to find your weak spots before the test.

You've been a mechanic for years

You've been a mechanic for years

The theory behind what you already do with your hands, drawn so you can explain the why to an inspector or a new helper.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT ELEVATOR MECHANIC EXAM ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Elevator Mechanic Exam Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked in the trade for years and just need to pass the written part?

Yes. It doesn't teach you to hold a wrench: it lays out the theory written exams ask about (electrical, schematics, safeties, code, fire service), one topic per page, so you can review what you don't use every day.

Where does the content come from?

It's checked against the current ASME A17.1/CSA B44 edition, NEC Article 620 and OSHA 29 CFR 1910 and 1926. The theory, the systems and the order you work through them are the same in NY, NJ, FL, DE, IN, UT and WA. What changes is which code edition your state enforces and the paperwork, so check both with your licensing board (in New York, Labor Law § 954).

Is this official material?

No. It's an independent study book. It isn't affiliated with or endorsed by ASME, NFPA, OSHA, NAEC or any state agency, and it doesn't reproduce code text or tables. It doesn't give you a license, a certification or continuing education hours: it helps you study for the exam that does.

Does it replace my training or apprenticeship?

No. It's study material. It doesn't replace hands-on training, your company's procedures or the code books themselves.

Are the practice questions the ones on the exam?

No. They're written for this book, in exam style, to help you find weak spots. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. It's a printable PDF: print the whole book or just the pages you want to keep in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading at night with nothing sticking.

The safety circuit, the governor and Phase I, drawn and clear.

You walk into the exam knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT ELEVATOR MECHANIC EXAM ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.